|
|
Scout Central Alarm Panel
|
Configure your item
* denotes required field
Number of analog inputs*
|
|
Part Number: SCAP
| The SCAP monitors 8 ON/OFF conditions and up to 3 analogs, which are typically temperature or humidity sensors. For each analog sensor input, the user can specify a low and high alarm limit.
When any condition, digital or analog, goes into alarm, the condition in alarm is presented on the display and a local horn is sounded.
If designated personnel are present, they can silence the alarm and prevent any callout by pressing the Silence button.
If the Silence button is not pressed, the SCAP will call up to 8 designated phone/pager numbers and notify personnel of the exact problem.
Anytime any condition goes into alarm, the process repeats.
- Calls up to 8 phones/pagers when an alarm occurs.
- Log of all alarms and events can be viewed from the internal LCD display.
- Locally programmed using the internal keypad and display.
- User voice messages are recorded using the internal microphone and speaker.
- User-recorded messages for the unit and each channel.
- Can be programmed locally or remotely.
- Includes UL power supply, backup battery, phone cord and manual.
|
Additional InformationClick here for more detailed information. |
Digital temperature switch with display and probe. Has 8Amp output relay that activates when temperature reaches high and/or low user-specified setpoint.
|
Temperatures from 0F to 135F. Provides 4-20ma or 1-5VDC output.
|
Analog temperature sensor with display. Has 4-20ma that tracks the input temperature and 5Amp output relay that activates when temperature reaches high and/or low user-specified setpoint.
|
Moisture sensor closes contact when the level of a liquid reaches the bottom of the sensor.
|
Humidity switch closes when humidity exceeds user selectable humidity.
|
Liquid sensor provides audible alarm, LED and closes contact when the level of a liquid reaches the bottom of the sensor.
|
|
|
|